Network simulator NS2 Simple installation steps for UBUNTU 12.04 operating system.
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
Here bold letters are typed by sra1reddy user.
Color bold letters are commands and yes.
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install ns2
[sudo] password for sra1reddy: your system Password here
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libotcl1 libxss1 tcl8.5 tk8.5
Suggested packages:
gnuplot tclreadline
The following NEW packages will be installed:
libotcl1 libxss1 ns2 tcl8.5 tk8.5
0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded.
Need to get 7,122 kB of archives.
After this operation, 19.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/main tcl8.5 i386 8.5.11-1ubuntu1 [1,097 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe libotcl1 i386 1.14+dfsg-2 [23.7 kB]
Get:3 http://in.archive.ubuntu.com/ubuntu/ precise/main libxss1 i386 1:1.2.1-2 [8,604 B]
Get:4 http://in.archive.ubuntu.com/ubuntu/ precise/main tk8.5 i386 8.5.11-1 [996 kB]
Get:5 http://in.archive.ubuntu.com/ubuntu/ precise/universe ns2 i386 2.35~rc10+dfsg-1 [4,997 kB]
Fetched 7,122 kB in 6min 1s (19.7 kB/s)
Selecting previously unselected package tcl8.5.
(Reading database ... 169009 files and directories currently installed.)
Unpacking tcl8.5 (from .../tcl8.5_8.5.11-1ubuntu1_i386.deb) ...
Selecting previously unselected package libotcl1.
Unpacking libotcl1 (from .../libotcl1_1.14+dfsg-2_i386.deb) ...
Selecting previously unselected package libxss1.
Unpacking libxss1 (from .../libxss1_1%3a1.2.1-2_i386.deb) ...
Selecting previously unselected package tk8.5.
Unpacking tk8.5 (from .../tk8.5_8.5.11-1_i386.deb) ...
Selecting previously unselected package ns2.
Unpacking ns2 (from .../ns2_2.35~rc10+dfsg-1_i386.deb) ...
Processing triggers for man-db ...
Setting up tcl8.5 (8.5.11-1ubuntu1) ...
update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode.
Setting up libotcl1 (1.14+dfsg-2) ...
Setting up libxss1 (1:1.2.1-2) ...
Setting up tk8.5 (8.5.11-1) ...
update-alternatives: using /usr/bin/wish8.5 to provide /usr/bin/wish (wish) in auto mode.
Setting up ns2 (2.35~rc10+dfsg-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed NS2 succussfully
sra1reddy@sra1reddy-desktop:~$
To install network animator by the following command,
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install nam
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libtclcl1
The following NEW packages will be installed:
libtclcl1 nam
0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded.
Need to get 289 kB of archives.
After this operation, 994 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libtclcl1 i386 1.20-6 [73.2 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe nam i386 1.15-1 [215 kB]
Fetched 289 kB in 16s (17.3 kB/s)
Selecting previously unselected package libtclcl1.
(Reading database ... 169466 files and directories currently installed.)
Unpacking libtclcl1 (from .../libtclcl1_1.20-6_i386.deb) ...
Selecting previously unselected package nam.
Unpacking nam (from .../archives/nam_1.15-1_i386.deb) ...
Processing triggers for man-db ...
Setting up libtclcl1 (1.20-6) ...
Setting up nam (1.15-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed nam succussfully
sra1reddy@sra1reddy-desktop:~$
To check installed nam just follow the below command
sra1reddy@sra1reddy-desktop:~$ nam
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install xgraph
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
ygraph
The following NEW packages will be installed:
xgraph
0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded.
Need to get 91.4 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe xgraph i386 12.1-15 [91.4 kB]
Fetched 91.4 kB in 6s (13.1 kB/s)
Selecting previously unselected package xgraph.
(Reading database ... 169479 files and directories currently installed.)
Unpacking xgraph (from .../xgraph_12.1-15_i386.deb) ...
Processing triggers for man-db ...
Setting up xgraph (12.1-15) ...
Congrates you installed xgraph succussfully
sra1reddy@sra1reddy-desktop:~$
Network simulator NS2 Simple installation steps for UBUNTU 12.04 operating system.
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
Here bold letters are typed by sra1reddy user.
Color bold letters are commands and yes.
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install ns2
[sudo] password for sra1reddy: your system Password here
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libotcl1 libxss1 tcl8.5 tk8.5
Suggested packages:
gnuplot tclreadline
The following NEW packages will be installed:
libotcl1 libxss1 ns2 tcl8.5 tk8.5
0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded.
Need to get 7,122 kB of archives.
After this operation, 19.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/main tcl8.5 i386 8.5.11-1ubuntu1 [1,097 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe libotcl1 i386 1.14+dfsg-2 [23.7 kB]
Get:3 http://in.archive.ubuntu.com/ubuntu/ precise/main libxss1 i386 1:1.2.1-2 [8,604 B]
Get:4 http://in.archive.ubuntu.com/ubuntu/ precise/main tk8.5 i386 8.5.11-1 [996 kB]
Get:5 http://in.archive.ubuntu.com/ubuntu/ precise/universe ns2 i386 2.35~rc10+dfsg-1 [4,997 kB]
Fetched 7,122 kB in 6min 1s (19.7 kB/s)
Selecting previously unselected package tcl8.5.
(Reading database ... 169009 files and directories currently installed.)
Unpacking tcl8.5 (from .../tcl8.5_8.5.11-1ubuntu1_i386.deb) ...
Selecting previously unselected package libotcl1.
Unpacking libotcl1 (from .../libotcl1_1.14+dfsg-2_i386.deb) ...
Selecting previously unselected package libxss1.
Unpacking libxss1 (from .../libxss1_1%3a1.2.1-2_i386.deb) ...
Selecting previously unselected package tk8.5.
Unpacking tk8.5 (from .../tk8.5_8.5.11-1_i386.deb) ...
Selecting previously unselected package ns2.
Unpacking ns2 (from .../ns2_2.35~rc10+dfsg-1_i386.deb) ...
Processing triggers for man-db ...
Setting up tcl8.5 (8.5.11-1ubuntu1) ...
update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode.
Setting up libotcl1 (1.14+dfsg-2) ...
Setting up libxss1 (1:1.2.1-2) ...
Setting up tk8.5 (8.5.11-1) ...
update-alternatives: using /usr/bin/wish8.5 to provide /usr/bin/wish (wish) in auto mode.
Setting up ns2 (2.35~rc10+dfsg-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed NS2 succussfully
sra1reddy@sra1reddy-desktop:~$
To install network animator by the following command,
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install nam
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libtclcl1
The following NEW packages will be installed:
libtclcl1 nam
0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded.
Need to get 289 kB of archives.
After this operation, 994 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libtclcl1 i386 1.20-6 [73.2 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe nam i386 1.15-1 [215 kB]
Fetched 289 kB in 16s (17.3 kB/s)
Selecting previously unselected package libtclcl1.
(Reading database ... 169466 files and directories currently installed.)
Unpacking libtclcl1 (from .../libtclcl1_1.20-6_i386.deb) ...
Selecting previously unselected package nam.
Unpacking nam (from .../archives/nam_1.15-1_i386.deb) ...
Processing triggers for man-db ...
Setting up libtclcl1 (1.20-6) ...
Setting up nam (1.15-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed nam succussfully
sra1reddy@sra1reddy-desktop:~$
To check installed nam just follow the below command
sra1reddy@sra1reddy-desktop:~$ nam
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install xgraph
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
ygraph
The following NEW packages will be installed:
xgraph
0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded.
Need to get 91.4 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe xgraph i386 12.1-15 [91.4 kB]
Fetched 91.4 kB in 6s (13.1 kB/s)
Selecting previously unselected package xgraph.
(Reading database ... 169479 files and directories currently installed.)
Unpacking xgraph (from .../xgraph_12.1-15_i386.deb) ...
Processing triggers for man-db ...
Setting up xgraph (12.1-15) ...
Congrates you installed xgraph succussfully
sra1reddy@sra1reddy-desktop:~$
You can also install gnuplot for ns2.
sra1reddy@sra1reddy-desktop:~$
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install gnuplot
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
Suggested packages:
gnuplot-doc imagemagick-doc autotrace curl enscript ffmpeg gimp grads hp2xx
html2ps libwmf-bin mplayer povray radiance texlive-base-bin transfig
ufraw-batch libgnomeprintui2.2-0
The following NEW packages will be installed:
gnuplot gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
0 upgraded, 21 newly installed, 0 to remove and 7 not upgraded.
Need to get 13.6 MB of archives.
After this operation, 37.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libwxbase2.8-0 i386 2.8.12.1-6ubuntu2 [597 kB]
.....
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up gnuplot-nox (4.4.3-0ubuntu3) ...
Setting up gnuplot-x11 (4.4.3-0ubuntu3) ...
Setting up gnuplot (4.4.3-0ubuntu3) ...
Setting up groff (1.21-7) ...
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up imagemagick (8:6.6.9.7-5ubuntu3.2) ...
Setting up libcdt4 (2.26.3-10ubuntu1) ...
Network simulator NS2 Simple installation steps for UBUNTU 12.04 operating system.
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
Here bold letters are typed by sra1reddy user.
Color bold letters are commands and yes.
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install ns2
[sudo] password for sra1reddy: your system Password here
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libotcl1 libxss1 tcl8.5 tk8.5
Suggested packages:
gnuplot tclreadline
The following NEW packages will be installed:
libotcl1 libxss1 ns2 tcl8.5 tk8.5
0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded.
Need to get 7,122 kB of archives.
After this operation, 19.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/main tcl8.5 i386 8.5.11-1ubuntu1 [1,097 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe libotcl1 i386 1.14+dfsg-2 [23.7 kB]
Get:3 http://in.archive.ubuntu.com/ubuntu/ precise/main libxss1 i386 1:1.2.1-2 [8,604 B]
Get:4 http://in.archive.ubuntu.com/ubuntu/ precise/main tk8.5 i386 8.5.11-1 [996 kB]
Get:5 http://in.archive.ubuntu.com/ubuntu/ precise/universe ns2 i386 2.35~rc10+dfsg-1 [4,997 kB]
Fetched 7,122 kB in 6min 1s (19.7 kB/s)
Selecting previously unselected package tcl8.5.
(Reading database ... 169009 files and directories currently installed.)
Unpacking tcl8.5 (from .../tcl8.5_8.5.11-1ubuntu1_i386.deb) ...
Selecting previously unselected package libotcl1.
Unpacking libotcl1 (from .../libotcl1_1.14+dfsg-2_i386.deb) ...
Selecting previously unselected package libxss1.
Unpacking libxss1 (from .../libxss1_1%3a1.2.1-2_i386.deb) ...
Selecting previously unselected package tk8.5.
Unpacking tk8.5 (from .../tk8.5_8.5.11-1_i386.deb) ...
Selecting previously unselected package ns2.
Unpacking ns2 (from .../ns2_2.35~rc10+dfsg-1_i386.deb) ...
Processing triggers for man-db ...
Setting up tcl8.5 (8.5.11-1ubuntu1) ...
update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode.
Setting up libotcl1 (1.14+dfsg-2) ...
Setting up libxss1 (1:1.2.1-2) ...
Setting up tk8.5 (8.5.11-1) ...
update-alternatives: using /usr/bin/wish8.5 to provide /usr/bin/wish (wish) in auto mode.
Setting up ns2 (2.35~rc10+dfsg-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed NS2 succussfully
sra1reddy@sra1reddy-desktop:~$
To install network animator by the following command,
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install nam
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libtclcl1
The following NEW packages will be installed:
libtclcl1 nam
0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded.
Need to get 289 kB of archives.
After this operation, 994 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libtclcl1 i386 1.20-6 [73.2 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe nam i386 1.15-1 [215 kB]
Fetched 289 kB in 16s (17.3 kB/s)
Selecting previously unselected package libtclcl1.
(Reading database ... 169466 files and directories currently installed.)
Unpacking libtclcl1 (from .../libtclcl1_1.20-6_i386.deb) ...
Selecting previously unselected package nam.
Unpacking nam (from .../archives/nam_1.15-1_i386.deb) ...
Processing triggers for man-db ...
Setting up libtclcl1 (1.20-6) ...
Setting up nam (1.15-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed nam succussfully
sra1reddy@sra1reddy-desktop:~$
To check installed nam just follow the below command
sra1reddy@sra1reddy-desktop:~$ nam
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install xgraph
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
ygraph
The following NEW packages will be installed:
xgraph
0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded.
Need to get 91.4 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe xgraph i386 12.1-15 [91.4 kB]
Fetched 91.4 kB in 6s (13.1 kB/s)
Selecting previously unselected package xgraph.
(Reading database ... 169479 files and directories currently installed.)
Unpacking xgraph (from .../xgraph_12.1-15_i386.deb) ...
Processing triggers for man-db ...
Setting up xgraph (12.1-15) ...
Congrates you installed xgraph succussfully
sra1reddy@sra1reddy-desktop:~$
You can also install gnuplot for ns2.
sra1reddy@sra1reddy-desktop:~$
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install gnuplot
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
Suggested packages:
gnuplot-doc imagemagick-doc autotrace curl enscript ffmpeg gimp grads hp2xx
html2ps libwmf-bin mplayer povray radiance texlive-base-bin transfig
ufraw-batch libgnomeprintui2.2-0
The following NEW packages will be installed:
gnuplot gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
0 upgraded, 21 newly installed, 0 to remove and 7 not upgraded.
Need to get 13.6 MB of archives.
After this operation, 37.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libwxbase2.8-0 i386 2.8.12.1-6ubuntu2 [597 kB]
.....
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up gnuplot-nox (4.4.3-0ubuntu3) ...
Setting up gnuplot-x11 (4.4.3-0ubuntu3) ...
Setting up gnuplot (4.4.3-0ubuntu3) ...
Setting up groff (1.21-7) ...
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up imagemagick (8:6.6.9.7-5ubuntu3.2) ...
Setting up libcdt4 (2.26.3-10ubuntu1) ...
Network simulator NS2 Simple installation steps for UBUNTU 12.04 operating system.
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
Here bold letters are typed by sra1reddy user.
Color bold letters are commands and yes.
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install ns2
[sudo] password for sra1reddy: your system Password here
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libotcl1 libxss1 tcl8.5 tk8.5
Suggested packages:
gnuplot tclreadline
The following NEW packages will be installed:
libotcl1 libxss1 ns2 tcl8.5 tk8.5
0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded.
Need to get 7,122 kB of archives.
After this operation, 19.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/main tcl8.5 i386 8.5.11-1ubuntu1 [1,097 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe libotcl1 i386 1.14+dfsg-2 [23.7 kB]
Get:3 http://in.archive.ubuntu.com/ubuntu/ precise/main libxss1 i386 1:1.2.1-2 [8,604 B]
Get:4 http://in.archive.ubuntu.com/ubuntu/ precise/main tk8.5 i386 8.5.11-1 [996 kB]
Get:5 http://in.archive.ubuntu.com/ubuntu/ precise/universe ns2 i386 2.35~rc10+dfsg-1 [4,997 kB]
Fetched 7,122 kB in 6min 1s (19.7 kB/s)
Selecting previously unselected package tcl8.5.
(Reading database ... 169009 files and directories currently installed.)
Unpacking tcl8.5 (from .../tcl8.5_8.5.11-1ubuntu1_i386.deb) ...
Selecting previously unselected package libotcl1.
Unpacking libotcl1 (from .../libotcl1_1.14+dfsg-2_i386.deb) ...
Selecting previously unselected package libxss1.
Unpacking libxss1 (from .../libxss1_1%3a1.2.1-2_i386.deb) ...
Selecting previously unselected package tk8.5.
Unpacking tk8.5 (from .../tk8.5_8.5.11-1_i386.deb) ...
Selecting previously unselected package ns2.
Unpacking ns2 (from .../ns2_2.35~rc10+dfsg-1_i386.deb) ...
Processing triggers for man-db ...
Setting up tcl8.5 (8.5.11-1ubuntu1) ...
update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode.
Setting up libotcl1 (1.14+dfsg-2) ...
Setting up libxss1 (1:1.2.1-2) ...
Setting up tk8.5 (8.5.11-1) ...
update-alternatives: using /usr/bin/wish8.5 to provide /usr/bin/wish (wish) in auto mode.
Setting up ns2 (2.35~rc10+dfsg-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed NS2 succussfully
sra1reddy@sra1reddy-desktop:~$
To install network animator by the following command,
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install nam
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libtclcl1
The following NEW packages will be installed:
libtclcl1 nam
0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded.
Need to get 289 kB of archives.
After this operation, 994 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libtclcl1 i386 1.20-6 [73.2 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe nam i386 1.15-1 [215 kB]
Fetched 289 kB in 16s (17.3 kB/s)
Selecting previously unselected package libtclcl1.
(Reading database ... 169466 files and directories currently installed.)
Unpacking libtclcl1 (from .../libtclcl1_1.20-6_i386.deb) ...
Selecting previously unselected package nam.
Unpacking nam (from .../archives/nam_1.15-1_i386.deb) ...
Processing triggers for man-db ...
Setting up libtclcl1 (1.20-6) ...
Setting up nam (1.15-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed nam succussfully
sra1reddy@sra1reddy-desktop:~$
To check installed nam just follow the below command
sra1reddy@sra1reddy-desktop:~$ nam
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install xgraph
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
ygraph
The following NEW packages will be installed:
xgraph
0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded.
Need to get 91.4 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe xgraph i386 12.1-15 [91.4 kB]
Fetched 91.4 kB in 6s (13.1 kB/s)
Selecting previously unselected package xgraph.
(Reading database ... 169479 files and directories currently installed.)
Unpacking xgraph (from .../xgraph_12.1-15_i386.deb) ...
Processing triggers for man-db ...
Setting up xgraph (12.1-15) ...
Congrates you installed xgraph succussfully
sra1reddy@sra1reddy-desktop:~$
You can also install gnuplot for ns2.
sra1reddy@sra1reddy-desktop:~$
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install gnuplot
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
Suggested packages:
gnuplot-doc imagemagick-doc autotrace curl enscript ffmpeg gimp grads hp2xx
html2ps libwmf-bin mplayer povray radiance texlive-base-bin transfig
ufraw-batch libgnomeprintui2.2-0
The following NEW packages will be installed:
gnuplot gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
0 upgraded, 21 newly installed, 0 to remove and 7 not upgraded.
Need to get 13.6 MB of archives.
After this operation, 37.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libwxbase2.8-0 i386 2.8.12.1-6ubuntu2 [597 kB]
.....
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up gnuplot-nox (4.4.3-0ubuntu3) ...
Setting up gnuplot-x11 (4.4.3-0ubuntu3) ...
Setting up gnuplot (4.4.3-0ubuntu3) ...
Setting up groff (1.21-7) ...
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up imagemagick (8:6.6.9.7-5ubuntu3.2) ...
Setting up libcdt4 (2.26.3-10ubuntu1) ...
Setting up libgraph4 (2.26.3-10ubuntu1) ...
Setting up libpathplan4 (2.26.3-10ubuntu1) ...
Setting up libgvc5 (2.26.3-10ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libmagickcor
Network simulator NS2 Simple installation steps for UBUNTU 12.04 operating system.
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
Here bold letters are typed by sra1reddy user.
Color bold letters are commands and yes.
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install ns2
[sudo] password for sra1reddy: your system Password here
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libotcl1 libxss1 tcl8.5 tk8.5
Suggested packages:
gnuplot tclreadline
The following NEW packages will be installed:
libotcl1 libxss1 ns2 tcl8.5 tk8.5
0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded.
Need to get 7,122 kB of archives.
After this operation, 19.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/main tcl8.5 i386 8.5.11-1ubuntu1 [1,097 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe libotcl1 i386 1.14+dfsg-2 [23.7 kB]
Get:3 http://in.archive.ubuntu.com/ubuntu/ precise/main libxss1 i386 1:1.2.1-2 [8,604 B]
Get:4 http://in.archive.ubuntu.com/ubuntu/ precise/main tk8.5 i386 8.5.11-1 [996 kB]
Get:5 http://in.archive.ubuntu.com/ubuntu/ precise/universe ns2 i386 2.35~rc10+dfsg-1 [4,997 kB]
Fetched 7,122 kB in 6min 1s (19.7 kB/s)
Selecting previously unselected package tcl8.5.
(Reading database ... 169009 files and directories currently installed.)
Unpacking tcl8.5 (from .../tcl8.5_8.5.11-1ubuntu1_i386.deb) ...
Selecting previously unselected package libotcl1.
Unpacking libotcl1 (from .../libotcl1_1.14+dfsg-2_i386.deb) ...
Selecting previously unselected package libxss1.
Unpacking libxss1 (from .../libxss1_1%3a1.2.1-2_i386.deb) ...
Selecting previously unselected package tk8.5.
Unpacking tk8.5 (from .../tk8.5_8.5.11-1_i386.deb) ...
Selecting previously unselected package ns2.
Unpacking ns2 (from .../ns2_2.35~rc10+dfsg-1_i386.deb) ...
Processing triggers for man-db ...
Setting up tcl8.5 (8.5.11-1ubuntu1) ...
update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode.
Setting up libotcl1 (1.14+dfsg-2) ...
Setting up libxss1 (1:1.2.1-2) ...
Setting up tk8.5 (8.5.11-1) ...
update-alternatives: using /usr/bin/wish8.5 to provide /usr/bin/wish (wish) in auto mode.
Setting up ns2 (2.35~rc10+dfsg-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed NS2 succussfully
sra1reddy@sra1reddy-desktop:~$
To install network animator by the following command,
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install nam
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libtclcl1
The following NEW packages will be installed:
libtclcl1 nam
0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded.
Need to get 289 kB of archives.
After this operation, 994 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libtclcl1 i386 1.20-6 [73.2 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe nam i386 1.15-1 [215 kB]
Fetched 289 kB in 16s (17.3 kB/s)
Selecting previously unselected package libtclcl1.
(Reading database ... 169466 files and directories currently installed.)
Unpacking libtclcl1 (from .../libtclcl1_1.20-6_i386.deb) ...
Selecting previously unselected package nam.
Unpacking nam (from .../archives/nam_1.15-1_i386.deb) ...
Processing triggers for man-db ...
Setting up libtclcl1 (1.20-6) ...
Setting up nam (1.15-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed nam succussfully
sra1reddy@sra1reddy-desktop:~$
To check installed nam just follow the below command
sra1reddy@sra1reddy-desktop:~$ nam
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install xgraph
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
ygraph
The following NEW packages will be installed:
xgraph
0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded.
Need to get 91.4 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe xgraph i386 12.1-15 [91.4 kB]
Fetched 91.4 kB in 6s (13.1 kB/s)
Selecting previously unselected package xgraph.
(Reading database ... 169479 files and directories currently installed.)
Unpacking xgraph (from .../xgraph_12.1-15_i386.deb) ...
Processing triggers for man-db ...
Setting up xgraph (12.1-15) ...
Congrates you installed xgraph succussfully
sra1reddy@sra1reddy-desktop:~$
You can also install gnuplot for ns2.
sra1reddy@sra1reddy-desktop:~$
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install gnuplot
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
Suggested packages:
gnuplot-doc imagemagick-doc autotrace curl enscript ffmpeg gimp grads hp2xx
html2ps libwmf-bin mplayer povray radiance texlive-base-bin transfig
ufraw-batch libgnomeprintui2.2-0
The following NEW packages will be installed:
gnuplot gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
0 upgraded, 21 newly installed, 0 to remove and 7 not upgraded.
Need to get 13.6 MB of archives.
After this operation, 37.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libwxbase2.8-0 i386 2.8.12.1-6ubuntu2 [597 kB]
.....
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up gnuplot-nox (4.4.3-0ubuntu3) ...
Setting up gnuplot-x11 (4.4.3-0ubuntu3) ...
Setting up gnuplot (4.4.3-0ubuntu3) ...
Setting up groff (1.21-7) ...
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up imagemagick (8:6.6.9.7-5ubuntu3.2) ...
Setting up libcdt4 (2.26.3-10ubuntu1) ...
Setting up libgraph4 (2.26.3-10ubuntu1) ...
Setting up libpathplan4 (2.26.3-10ubuntu1) ...
Setting up libgvc5 (2.26.3-10ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libmagickcore4-extra (8:6.6.9.7-5ubuntu3.2) ...
Setting up libnetpbm10 (2:10.0-15) ...
Setting up netpbm (2:10.0-15) ...
Setting up psutils (1.17-31) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sra1reddy@sra1reddy-desktop:~$
Network simulator NS2 Simple installation steps for UBUNTU 12.04 operating system.
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
Here bold letters are typed by sra1reddy user.
Color bold letters are commands and yes.
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install ns2
[sudo] password for sra1reddy: your system Password here
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libotcl1 libxss1 tcl8.5 tk8.5
Suggested packages:
gnuplot tclreadline
The following NEW packages will be installed:
libotcl1 libxss1 ns2 tcl8.5 tk8.5
0 upgraded, 5 newly installed, 0 to remove and 7 not upgraded.
Need to get 7,122 kB of archives.
After this operation, 19.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/main tcl8.5 i386 8.5.11-1ubuntu1 [1,097 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe libotcl1 i386 1.14+dfsg-2 [23.7 kB]
Get:3 http://in.archive.ubuntu.com/ubuntu/ precise/main libxss1 i386 1:1.2.1-2 [8,604 B]
Get:4 http://in.archive.ubuntu.com/ubuntu/ precise/main tk8.5 i386 8.5.11-1 [996 kB]
Get:5 http://in.archive.ubuntu.com/ubuntu/ precise/universe ns2 i386 2.35~rc10+dfsg-1 [4,997 kB]
Fetched 7,122 kB in 6min 1s (19.7 kB/s)
Selecting previously unselected package tcl8.5.
(Reading database ... 169009 files and directories currently installed.)
Unpacking tcl8.5 (from .../tcl8.5_8.5.11-1ubuntu1_i386.deb) ...
Selecting previously unselected package libotcl1.
Unpacking libotcl1 (from .../libotcl1_1.14+dfsg-2_i386.deb) ...
Selecting previously unselected package libxss1.
Unpacking libxss1 (from .../libxss1_1%3a1.2.1-2_i386.deb) ...
Selecting previously unselected package tk8.5.
Unpacking tk8.5 (from .../tk8.5_8.5.11-1_i386.deb) ...
Selecting previously unselected package ns2.
Unpacking ns2 (from .../ns2_2.35~rc10+dfsg-1_i386.deb) ...
Processing triggers for man-db ...
Setting up tcl8.5 (8.5.11-1ubuntu1) ...
update-alternatives: using /usr/bin/tclsh8.5 to provide /usr/bin/tclsh (tclsh) in auto mode.
Setting up libotcl1 (1.14+dfsg-2) ...
Setting up libxss1 (1:1.2.1-2) ...
Setting up tk8.5 (8.5.11-1) ...
update-alternatives: using /usr/bin/wish8.5 to provide /usr/bin/wish (wish) in auto mode.
Setting up ns2 (2.35~rc10+dfsg-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed NS2 succussfully
sra1reddy@sra1reddy-desktop:~$
To install network animator by the following command,
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install nam
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libtclcl1
The following NEW packages will be installed:
libtclcl1 nam
0 upgraded, 2 newly installed, 0 to remove and 7 not upgraded.
Need to get 289 kB of archives.
After this operation, 994 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libtclcl1 i386 1.20-6 [73.2 kB]
Get:2 http://in.archive.ubuntu.com/ubuntu/ precise/universe nam i386 1.15-1 [215 kB]
Fetched 289 kB in 16s (17.3 kB/s)
Selecting previously unselected package libtclcl1.
(Reading database ... 169466 files and directories currently installed.)
Unpacking libtclcl1 (from .../libtclcl1_1.20-6_i386.deb) ...
Selecting previously unselected package nam.
Unpacking nam (from .../archives/nam_1.15-1_i386.deb) ...
Processing triggers for man-db ...
Setting up libtclcl1 (1.20-6) ...
Setting up nam (1.15-1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place .
Congrates you installed nam succussfully
sra1reddy@sra1reddy-desktop:~$
To check installed nam just follow the below command
sra1reddy@sra1reddy-desktop:~$ nam
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install xgraph
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
ygraph
The following NEW packages will be installed:
xgraph
0 upgraded, 1 newly installed, 0 to remove and 7 not upgraded.
Need to get 91.4 kB of archives.
After this operation, 230 kB of additional disk space will be used.
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe xgraph i386 12.1-15 [91.4 kB]
Fetched 91.4 kB in 6s (13.1 kB/s)
Selecting previously unselected package xgraph.
(Reading database ... 169479 files and directories currently installed.)
Unpacking xgraph (from .../xgraph_12.1-15_i386.deb) ...
Processing triggers for man-db ...
Setting up xgraph (12.1-15) ...
Congrates you installed xgraph succussfully
sra1reddy@sra1reddy-desktop:~$
You can also install gnuplot for ns2.
sra1reddy@sra1reddy-desktop:~$
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install gnuplot
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
Suggested packages:
gnuplot-doc imagemagick-doc autotrace curl enscript ffmpeg gimp grads hp2xx
html2ps libwmf-bin mplayer povray radiance texlive-base-bin transfig
ufraw-batch libgnomeprintui2.2-0
The following NEW packages will be installed:
gnuplot gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
0 upgraded, 21 newly installed, 0 to remove and 7 not upgraded.
Need to get 13.6 MB of archives.
After this operation, 37.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libwxbase2.8-0 i386 2.8.12.1-6ubuntu2 [597 kB]
.....
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up gnuplot-nox (4.4.3-0ubuntu3) ...
Setting up gnuplot-x11 (4.4.3-0ubuntu3) ...
Setting up gnuplot (4.4.3-0ubuntu3) ...
Setting up groff (1.21-7) ...
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up imagemagick (8:6.6.9.7-5ubuntu3.2) ...
Setting up libcdt4 (2.26.3-10ubuntu1) ...
Setting up libgraph4 (2.26.3-10ubuntu1) ...
Setting up libpathplan4 (2.26.3-10ubuntu1) ...
Setting up libgvc5 (2.26.3-10ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libmagickcore4-extra (8:6.6.9.7-5ubuntu3.2) ...
Setting up libnetpbm10 (2:10.0-15) ...
Setting up netpbm (2:10.0-15) ...
Setting up psutils (1.17-31) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sra1reddy@sra1reddy-desktop:~$
Congrates you installed gnuplot succussfully .
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
sra1reddy@sra1reddy-desktop:~$
Congrates you installed gnuplot succussfully .
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
sra1reddy@sra1reddy-desktop:~$
e4-extra (8:6.6.9.7-5ubuntu3.2) ...Setting up libnetpbm10 (2:10.0-15) ...
Setting up netpbm (2:10.0-15) ...
Setting up psutils (1.17-31) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sra1reddy@sra1reddy-desktop:~$
Congrates you installed gnuplot succussfully .
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
sra1reddy@sra1reddy-desktop:~$
Setting up libgraph4 (2.26.3-10ubuntu1) ...
Setting up libpathplan4 (2.26.3-10ubuntu1) ...
Setting up libgvc5 (2.26.3-10ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libmagickcore4-extra (8:6.6.9.7-5ubuntu3.2) ...
Setting up libnetpbm10 (2:10.0-15) ...
Setting up netpbm (2:10.0-15) ...
Setting up psutils (1.17-31) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sra1reddy@sra1reddy-desktop:~$
Congrates you installed gnuplot succussfully .
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
sra1reddy@sra1reddy-desktop:~$
Setting up libgraph4 (2.26.3-10ubuntu1) ...
Setting up libpathplan4 (2.26.3-10ubuntu1) ...
Setting up libgvc5 (2.26.3-10ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libmagickcore4-extra (8:6.6.9.7-5ubuntu3.2) ...
Setting up libnetpbm10 (2:10.0-15) ...
Setting up netpbm (2:10.0-15) ...
Setting up psutils (1.17-31) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sra1reddy@sra1reddy-desktop:~$
Congrates you installed gnuplot succussfully .
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
sra1reddy@sra1reddy-desktop:~$
You can also install gnuplot for ns2.
sra1reddy@sra1reddy-desktop:~$
sra1reddy@sra1reddy-desktop:~$ sudo apt-get install gnuplot
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
Suggested packages:
gnuplot-doc imagemagick-doc autotrace curl enscript ffmpeg gimp grads hp2xx
html2ps libwmf-bin mplayer povray radiance texlive-base-bin transfig
ufraw-batch libgnomeprintui2.2-0
The following NEW packages will be installed:
gnuplot gnuplot-nox gnuplot-x11 groff imagemagick imagemagick-common libcdt4
libgraph4 libgvc5 libilmbase6 liblqr-1-0 libmagickcore4 libmagickcore4-extra
libmagickwand4 libnetpbm10 libopenexr6 libpathplan4 libwxbase2.8-0
libwxgtk2.8-0 netpbm psutils
0 upgraded, 21 newly installed, 0 to remove and 7 not upgraded.
Need to get 13.6 MB of archives.
After this operation, 37.3 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://in.archive.ubuntu.com/ubuntu/ precise/universe libwxbase2.8-0 i386 2.8.12.1-6ubuntu2 [597 kB]
.....
Setting up libwxbase2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up libwxgtk2.8-0 (2.8.12.1-6ubuntu2) ...
Setting up gnuplot-nox (4.4.3-0ubuntu3) ...
Setting up gnuplot-x11 (4.4.3-0ubuntu3) ...
Setting up gnuplot (4.4.3-0ubuntu3) ...
Setting up groff (1.21-7) ...
Setting up liblqr-1-0 (0.4.1-1.1) ...
Setting up imagemagick-common (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickcore4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up libmagickwand4 (8:6.6.9.7-5ubuntu3.2) ...
Setting up imagemagick (8:6.6.9.7-5ubuntu3.2) ...
Setting up libcdt4 (2.26.3-10ubuntu1) ...
Setting up libgraph4 (2.26.3-10ubuntu1) ...
Setting up libpathplan4 (2.26.3-10ubuntu1) ...
Setting up libgvc5 (2.26.3-10ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libmagickcore4-extra (8:6.6.9.7-5ubuntu3.2) ...
Setting up libnetpbm10 (2:10.0-15) ...
Setting up netpbm (2:10.0-15) ...
Setting up psutils (1.17-31) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
sra1reddy@sra1reddy-desktop:~$
Congrates you installed gnuplot succussfully .
These are simple ns2 installation steps i implemented to install ns2 on my desktop.
I do not any errors .
Before installation please update the ubuntu software
sra1reddy@sra1reddy-desktop:~$
No comments:
Post a Comment